Modular Speed Config

allows you to configure your characters movespeed with options for general speed, gradient weight scaling, weight tier modifiers, sneak modifier, jump modifier, and sprint/run/walk modifiers

modify values at the top of the file to configure things as you like, this mod should modify sneak, general, and jump movement

modular and also compatible with my other mods

this mod comes with default values and will need to be configured to change your speed

to configure: open the provided file SpeedConfig.lua in mod/action/script/modules and adjust these values at the top of the file:

--1 is 1x or 100 percent for most values

--general modifier

scgeneralspeed = 1

--light weight tier modifier

sclightspeed = 1

--medium weight tier modifier

scnormalspeed = 1

--heavy weight tier modifier

scheavyspeed = 1

--overweight tier modifier

scoverweightspeed = 1

--sprint modifier

scsprintspeed = 1

--run/default modifier

scrunspeed = 1

--walk modifier

scwalkspeed = 1

--sneak modifier

scsneakspeed = 1

--jump modifier

scjumpspeed = 1

--chargejumppower only applies if using my double jump mod

scchargejumppower = 1. 6

--gradient reduction is disabled if scgradientredux is less than 1, this uses weight ratio to reduce the value to create gradient scaling

--at 1, 0percent equipweight ratio would be 1x final speed, at 100percent it would either be 0x or very close, the ratio calculation is not 1 to 1 of just your equipweight ratio but is accurate enough

scgradientredux = 0

------------

these are the config settings I use for example:

--1 is 1x or 100 percent for most values

--general modifier

scgeneralspeed = 0. 9

--light weight tier modifier

sclightspeed = 1

--medium weight tier modifier

scnormalspeed = 1

--heavy weight tier modifier

scheavyspeed = 1

--overweight tier modifier

scoverweightspeed = 1

--sprint modifier

scsprintspeed = 1. 11

--run/default modifier

scrunspeed = 1

--walk modifier

scwalkspeed = 1

--sneak modifier

scsneakspeed = 0. 9

--jump modifier

scjumpspeed = 1

--chargejumppower only applies if using my double jump mod

scchargejumppower = 2. 1

--gradient reduction is disabled if scgradientredux is less than 1, this uses weight ratio to reduce the value to create gradient scaling

--at 1, 0percent equipweight ratio would be 1x final speed, at 100percent it would either be 0x or very close, the ratio calculation is not 1 to 1 of just your equipweight ratio but is accurate enough

scgradientredux = 1. 42

------------

To Install:  copy provided mod folder contents into your modengine mod folder

To Merge(for most mods): delete the included c000.hks file i