SmartPower

Support the mods All my Timberborn mods are free. I make them for fun, because I enjoy improving the game and experimenting with new ideas. Donations are completely optional. If you enjoy the mods and want to say thanks, you can buy me a coffee or donate via PayPal. It is never required, but it is always appreciated and helps keep me motivated. Buy Me a Coffee Donate via PayPal Overview This mod modifies some power generating and consuming buildings to optimize power usage. It also adds some UI sugar to the existing components. Supported languages English Русский Français (Erazil@Discord) Deutsch (juf0816@Discord) 简体中文 (EndermanLV@GitHub) Ironteeth Engine Engines automatically turn on and off to minimize the wood consumption while providing enough power supply to the network. If there are batteries in the network, then the engines will only produce energy to keep the total network charge reserve within a specified range. For example, 'not less than 10%, but not greater than 35%.' This can be configured per engine. Power Wheel If automation is turned on for the wheel, it will pause and resume based on the demand/supply. The same approach to battery charging applies as for the Engine. Engine and Power Wheel settings aren't shared. Wheels differ slightly from Engines in terms of how they compensate for supply shortages. It may take a significant amount of time before an unpaused wheel starts producing energy. Therefore, when a shortage is detected, all the wheels in the network will start. Then, some of them that are not needed will pause. Ironteeth bot charging station The charging station consumes full power only when charging a bot. In the idle state, it is only taking 1 hp. All power consumers The minimum power effectiveness can be set to suspend the building if there is insufficient power in the network. The building suspension can be configured to activate when the battery charge in the network is too low. The suspended building will release the workers (if any),