Incremental Fusion Core Charging Stations - Recharger

INTRODUCTION

You might be thinking, "aren't there already fusion core charging mods?", and yes, there are. But this one charges any fusion core incrementally, instead of taking charges or building up charges to give you only 100% full cores.

So you can remove a fusion core at any time and it will be charged only as much as you actually allowed it to be.

ie you leave to go do something and come back after an hour with 3 fusion cores connected to the Generator- it will have charged from 48 to 51 percent.

REQUIREMENTS

F4SE for some scripting functions

Mod Configuration Menu for Nuclear Material Efficiency control

Everything is made in the workshop menu, but be warned, it's quite a required materials list as I wanted this to be fairly expensive.

There's a generator component in the proper Workshop section and the Fusion Core Charging Station itself in the Power>Misc section.

For full functionality craft both and snap them together.

There's now an Electrolysis Machine that will separate Nuclear Material from Purified water.

INTERACTION

Use a fusion core to any percent. Fully using up a core will give you an Empty Core, to be found in the Misc section.

Build the station with Science! 1(6 Int)

Fuel the station with Nuclear Material at a rate of 1 NM per 60 charge cycles. That's 2 hours of charging. The station automatically pulls more NM from the normal workshop container(same place you deposit junk for scrapping).

Power up the station with generators.

Instructions

Insert a single core into the station to begin charging, it will show how much Nuclear Material you will need in the Workshop for a 100% charge.

Wait, sleep, or just play the game until charging is complete. You will get a notification as the station sends out a radio pulse for your Pip-Boy to receive.

Take out the core and use as normal in power armor and etc.

You could instead take the core out at any point before full charge to have the core accurately but only partially charged.

Again, the core works as normal.

Build the Electrolysis Machine with Science! 1(6 Int)

This device requires 1 Purified Water in the workshop to do its work, and can handle 3 units of water per hour.

It produces 1 Nuclear Material per unit of water, and returns