DiRCI [StationeersLaunchPad]

DiRCI Adds DiRCI to Stationeers, A logistics robot. DiRCI (or Directed Relocatable Cargo Interface) is a controllable rover which can be ordered to move to a point, pull from items from vending machines, and deposite items into a nearby chute inlet. Having 10 storage slots and good speed, DiRCI can help connect your outposts without literally having to connect them. DiRCI requires programming knowledge to operate, but like AIMeE it can make your life as a Stationeer a little easier. Deep mining site a little too far - DiRCI can pick up those ores. Don't feel like setting up passive power generation at the outpost - DiRCI can deliver batteries or fuel canisters then pickup the empty. Regular sorting systems too simple for you - DiRCI... DiRCI isn't really meant for that, but if you can make DiRCI sort, more power to you. DiRCI's kit is produced via tier two Electronics Printer: Time: 30 Energy: 2000 Gold: 5 Copper: 5 Silicon: 20 Steel: 20 Electrum: 10 DiRCI has 8 modes: 0 = Idle = Do nothing 1 = MoveToTarget = Move to target in straight line, returns to Idle when reached 2 = LoadCargo = Pull items from the Vending Machine, Small Vending Machine, or Refrigerated Vending Machine it is facing 3 = UnloadCargo = Unload in chute input or chute bin within 2 meters / 1. 25 large grids 4 = CargoFull = Automaticly assigned if full while trying to load Cargo 5 = CargoEmpty = Automaticly assigned if empty while trying to unload Cargo 6 = PathFromStack = See Below 7 = StackPointArrived = Automaticly assigned, used for telling when to move through the stack PathFromStack: A path point is stored in the stack in four addresses. - Must be greater than zero - This point's X position - This point's Y position - This point's Z position Recommendation: Clear the stack before writing to it and use the put instruction for writing path points to maintain alignment. The absolute value of Setting minus one is the stack position. (1 or -1 is position 0 in