Programmable Hydro LArRE

Instructions are read from its own stack, only positive destinations. If you need this long of a Hydro LArRE rail, it should be a loop, because it hops to the top of the stack and the end. A stack can hold 512 entries An Import should be defined first. But can be reassigned at any point in the stack. The crops need to be manually planted first. It will step through the stack and check for any seeding crops below its current position, fully harvesting them, placing produce in the import bin, and then replanting the seed. Has a setting for farming seeds. It will also detect if crops are like tomatoes, aka not needing to be replanted. The hydro LArRe is d0 Examples of instructions. Import bin: push: multiply the station# by 1000 push: device ref ID Plant destination: push: the station# Before every move, it will check to see if the number in the stack its currently looking at is 1000 or more. That will trigger it to update its stored import bin position and reference ID, it will pause for a tick to do so. The code has explanations and the stack should be written from another chip. Though I could of made it read directly from another chip, I like the idea of flashing a list of instructions. Here's an example for flashing this chip. https://steamcommunity.com/sharedfiles/filedetails/?id=3462269525 Why am I farming sugarcane, cause I want to. Let me know of any issues, cause the main block of the code was written at 1am after fixing a washing machine.