[F&S] Filtration Ratio Control

Description Set the filtering threshold and when the ratio is reached, the filtering is turned off.​ Automatically determines the filter type and sets the filtering to the desired value. Requirements 1 Integrated Circuit (IC10). 1 Kit (Atmospherics) type Filtration. IC ports description Port Device D0 Alert (Any device with on/off support) (Optional) D1 Not used Changeable values in IC code define DesiredValue 100 # 100=100%,5=5%,1. 35=1. 35% Example: You have a mixture of 50% CO2 and 50% O2 you want to reduce the percentage of CO2 to 20% just set 20 in the code and put CO2 filters Important Only supports the same types of filters, you can't put different types of filters in the slots. If you need to completely filter gases, you do not need this IC10. Note If the filter has exhausted its resource, the chip will send a signal to D0 (if used) If you place different types of filters, the chip will send a signal to D0 (if used) The examples are simplified as much as possible for understanding, they do not pretend to be the best efficiency. The base filtration example does not control the pressure on the base, you can make a mixture of gases yourself or looking here https://steamcommunity.com/sharedfiles/filedetails/?id=2812490284 A large gas tank is needed to stabilize the fluctuations in the percentage of gases, otherwise the filters will not work properly. Game version support 0. 2. 3920. 18842 06/04/2023