Volume Pump Mixer

​Mixer using two volume pumps - self correcting. In game gas mixer is pain in a back. Unless your inputs are with same pressure and temperature and they stay like this during 'mixing' operation, you will have unbalanced mix. This script solves this by checking resulting mix and correcting flow. Have gasses with different temperature? - no problem! Different pressure? - no problem! Unstable source? - again no problem! targetKpa - desired pressure, read from sensor dOneRatio - desired resulting ratio of gas from pump 1, read from sensor smoothPc - throttle down when sensor pressure is % of targetKpa maxDiffRatio - max % of ratio imbalance - when this threshold is breached, other pump will be shut off minOutput, maxOutput - min max settings of pumps (safety value, if using some Boolean device, like active vent set this to 0/1). d0 - sensor/tank d1 - pump 1 (ratio controlled) d2 - pump 2 (ratio enslaved) In load sensor, please set what gas is pumped by pump1 Default settings are set for fuel mixing - use pump 1 as o2, and pump 2 as h2. We will not be responsible for fires if You mix too hot gases and they self-ignite. Tips: - For small capacity output (short pipe segment) increase target pressure to 20Mpa and/or reduce maxOutput to 1-2, otherwise, in one tick You will reach over max pressure and code will not correct itself. - If You plan to mix other compounds, adjust dOneRatio and replace OxygenRatio to whatever is on pump attached to d1