(Outdated) Specific Stack Size

Indroduction Have you wanted your stacker to be a bit smarter and provide you more information on creating the stack sizes you want? Well look no further as this improves the stacker by giving you the information you need and allowing you to make the stack sizes you want. Brought to you by the Manny K SoSo Industries. Once the setup is complete you will be able to change the stack size of the items via 2 dials. You can see what size you will be making and a red text will occur when the stack size is not enough for what you want. There is also a display of what is currently inside of the stacker's inventory. If you want the optional display it will tell you how large the stack size is as well as tell you how many stacks of the given stack size will be given (based on your dial inputs). Depending if the exact size is met, the display will be green, otherwise if one stack will not be of the required size it will be yellow. Required 1x Stacker 1x IC Housing 1x Integrated Circuts (IC10) 3x Kit (Logic Switch) 2x Dial 1x Button 3x Kit (Consoles) (1 is optional) 1x Console (With Hash Display) 2x LED Display (Small) (1 is optional) Setup Once everything is wired together its time to set up the IC Housings, Displays, and Logic d0 Stacker d1 Dial (Your 10s Dial) d2 Dial (Your 100s Dial) d3 Button (Exports stacker) d4 LED Display (Small) (Displays Stack Size) d5 LED Display (Small) (Optional, Displays both current amount in stacker and how many stacks are produced) hr] Code Adjustments (Optional) On lines 10 and 11 you can change some of the math done to calculate the wanted stack size from the dials. Below I use 100 and 10 since I mainly use it for ingots. But if you want to use this for other items you could change the mul100 to 10 and mul10 to 1 for smaller stack sizes. define mul100 100 define mul10 10 Distribution This script is distributed as is, any modification can result in the script not working correctly and causing errors. You are not allowed to redistrubute this co