(Outdated) Smart Printing

Indroduction Have you ever wanted you printing to be smarter for both the printer and provide you the information you need to make that print successful. Look no futhur than here! I bring you the future of printing smartly by upgrading you printing experience via display that will give you all the information like the following, what ingots are required to print the item, how much of each ingot is required for the current print, the amount of that ingot left after that print is done (calculated by how much you are going to print), and how much you are going to print/how much has already been printed. With just selecting your item you want to print and a few presses via the dials and you are ready to go! Brought to you by the Manny K SoSo Industries. Once the setup is complete it will automatically start calulations. Setting the dials to any amount will correctly display how much of that ingot is needed (depending on how much you want to print), and how much is going to be left after the print. If you do not have enough of an ingot it will turn both the required and leftover displays to red and the leftover will be a negative number saying how much of that ingot to make the print successful. This won't stop the print from happening, but just as a warning. When you are ready to print just hit the activate button on the printer and the quantity display will switch over to how many it has printed. Once it has reached the required amount the printer will stop printing. If you run out of materials during the print it will stop printing and reset. If you have the quantity set to 0 it will print till you tell it to stop or it runs out of materials. Required 1x Printer (Autolathe, Electronic Printer, Hydraulic Pipe Bender, Tool Manufactory, Security Printer) 1x IC Housing 1x Integrated Circuts (IC10) 2x Kit (Logic Switch) 2x Dials 3x Kit (Consoles) (1 is optional) 1x Console (With Hash Display) 2x LED Display (Small) (Optional) Setup Once everything is wired together its tim