Easy Configurable Clock v1.1

Clocks are surprisingly useful to have around when you're deep in your base and can't see the sun (Vulcan's can be a bit of a problem, for instance), or if you want to know when night will end so you can take full advantage of limited daylight. This clock script is both versatile and simple to use, with a few flexible configuration options. It supports up to five LED displays directly controlled by the IC (on d1 through d5). All three sizes of LED display from the console kit are recognized, and any invalid device will be ignored instead of crashing the script. Logic Memory parts can be used as well, and will have the same time value written to them, allowing it to be shared to a different wiring network for use by a logic/batch writer, etc. The currently selected LED color is shown on the IC housing too, so you can have a second logic/batch writer updating the color on those remote displays. With only a little work, even a very large base can have a clock display in every room. (For instance, if the clock IC and memory are on your heavy cable mains from your battery bank, anyplace that has a transformer can also have logic writers to pull the clock and color data from the mains and write it to the appropriate displays in the area's local power network.) Requires one daylight sensor (on d0), placed on the south side of a block so that it looks toward the southern horizon, with the data port toward the ground (see the screenshot, which was taken while looking north). The sensor placement may become more configurable later. If north-facing or upside-down sensor placement options (for instance) would be a highly desirable feature for you, please leave feedback. The text color on the display will change to denote AM and PM (blue and red by default). The color choices are configurable, and both may be set to the same value if you don't want the clock to change colors. The default 12 hour mode looks great (IMHO). It won't suffer from any loss of leading or trailing zeros.