Embers XD Deutsch (german)

Originalmod by mindfIux

Originalmod wird benötigt.

Diese Mod verwendet Partikel für den Flammeneffekt. Um sicherzustellen, dass die Flammen und der Rest der Effekte korrekt angezeigt werden, stellen Sie bitte sicher, dass der folgende Parameter in SkyrimPrefs.ini gesetzt ist:

Bitte beachtet die Installationsnotizen der Originalmod

Installation Notes

This mod uses particles for the flame effect so to make sure the flames and the rest of the effects

are displayed correctly, please ensure the following parameter is set in

SkyrimPrefs.ini:

iMaxDesired=1500

Complex Particle Lights offered by the recent versions of ENBSeries are fully supported by Embers XD.

I recommend enabling EnableBigRance (in enbseries.ini) as follows:

EnableBigRange=true

Frequently Asked Questions

How to make the flames more or less intense and adjust flame color?

Increasing the intensity related parameters in the category of enbseries.ini will make the flames more intense, while reducing them will have an opposite effect. The curve parameters work like gamma control. Increasing the curve tends to make

the flames more red and concentrated, while decreasing will make the

flames more yellow. Be aware that increasing the curve also easily

results in the flames blowing out especially with high amount of bloom.

Don't be afraid to go way above 1. 0 if necessary. For reference, here's

how mine are set at the moment:

IgnoreWeatherSystem=true

IntensityDawn=2. 0

IntensitySunrise=2. 0

IntensityDay=2. 0

IntensitySunset=2. 0

IntensityDusk=2. 0

IntensityNight=2. 0

IntensityInteriorDay=2. 0

IntensityInteriorNight=2. 0

CurveDawn=1. 5

CurveSunrise=1. 5

CurveDay=1. 5

CurveSunset=1. 5

CurveDusk=1. 5

CurveNight=1. 5

CurveInteriorDay=1. 5

CurveInteriorNight=1. 5

Embers look overly bright or dull. How to adjust the intensity of the glow?

Adjust the intensity and curve parameters in the category. Like with flames, increasing the intensity related parameters will make the embers brighter, while reducing them

will have an opposite effect. Increasing and decreasing the curve parameters will give the glow more or less a red tint. For reference, here's how mine are set at the moment:

IgnoreWeatherSystem=true

IntensityDawn=4. 0

IntensitySunrise=4. 0

IntensityDay=4. 0

IntensitySunset=4. 0

IntensityDusk=4. 0

IntensityNight=4. 0

IntensityInteriorD