Realistic H-Shifter

Supported Vehicles:

• []Corris (Both 4 & 5-speed)

  []Sorbet

  []Gifu

  []Kekmet (With range selector)

  Features

  :
  • []Hold the clutch key to open H-Shifter (Uses your bound "CLUTCH BTN" keybind)

    []Kekmet range High/Low Control

    []Configurable GUI positioning and size

    []H-Shifter made to feel realistic:

    []Helps you fall into gear

    []Resistance while going into gear

    []Simulated gearbox temperature dependent on outside temperature and offset by engine temperature that causes dynamic resistance to gear selection and mouse movement (kicks in at -15C and maxes out at -40C)

    How to use:

    1. Drop the .dll to your Mods/ folder

    2. In-game it uses your clutch key binding (default X)

    3. Kekmet range selector is used with Clutch Key + Mouse2

    1. Enable H-Shifter - Disables/Enables the mod

    2. Temperature affects gearbox - Disables/Enables the gearbox temperature simulation

    3. Shift Mouse Sensitivity - Changes the sensitivity inside the H-Shifter

    4. GUI Size (%) - Changes GUI size

    5. GUI Position - Lets you choose your preferred location for the H-Shifter display

    Advanced Settings:

    1. Gear knob detent start - Distance at which you will feel resistance when trying to go into gear, higher value = resistance closer to neutral lane

    2. Gear knob resistance - How much strength there is to the resistance while trying to go into gear, higher value = lower resistance

    3. Gear knob assist pull speed - Speed with which your gear knob will try to "fall" into gear when close enough, higher value = pulls from further away

    4. Gear knob neutral lane assist distance - Distance at which the gear knob will snap into a vertical lane while touching the neutral lane roof, higher value = snaps into vertical lane from further away