Assorted 6 cylinder engines

I made a series of different 6 cylinder engines because I wanted to and I like being able to see the difference in size between the different layouts. All of the engines have the same 6000 rpm redline and run on 2 throttles, so they all have the same power output, about 1050Nm max torque and 450 kw max power. There doesn't seem to be any functional penalty for an engine being unbalanced or having an uneven firing order, but I still took the time to make sure 5 of these engines do fire every 120 degrees and have firing orders that you would find in real life. I made the left and right banks of these balanced engines slightly offset so I could use the small crank shaft parts with the large pistons to more accurately create the VR6 and Boxer engines, as well as simulate split crank pins for the two V6 engines. The offset and small crank parts makes building these a little more complicated, but they are almost exactly the same size as the engines that use the large crank pieces. The 3 engines that are slightly removed are the ones that use the large crank parts and do not have the offset, so technically the V engines will have uneven firing impulses because the left and right banks are not at a 120 degree angle and the crank pins are not split to make up for it like in real life. The Flat V is not a real Boxer engine. G - Starter motors F - Throttle C - Clutch B - Load brakes Use them if you want, I made them easy to take off the rack.