Longsword circling around sluggish foes

初始长刀·闪身斩自动绕背 — QiyunRearStep v0. 1. 6 实验版

为齐云初雪的默认武器技“闪身斩”加入自动绕背位移。装备该长刀、锁定附近敌人并成功发动默认武器技后，Mod 尝试沿可用路线移动至敌人身后。

• 检查武器显示名称、强化后缀、默认武器技编号、施放状态和长刀武器技动画。

• 默认在约 0. 65 秒的路线时段内尝试绕背；目标需在约 3. 5 米范围内。

• 检查地面支撑、高差、路线碰撞和敌人移动/转向；不满足条件时停止本次额外位移。

• 正常结束、中断、死亡、解除锁定或换武器时，恢复本 Mod 临时修改的根运动设置。

• 不修改伤害、羽毛消耗、冷却或动画速度，也不直接触发破刹。

• 不是瞬移或必定绕背。敌人快速转身、远离、体型及地形障碍可能导致取消或无法到达背后。

当前默认仅识别“齐云初雪”与“齊雲初雪”的显示名称，支持末尾 +数字 的强化后缀。

不是所有长刀、所有武器技通用。其他语言显示名称未在默认列表内，需要在配置 WeaponNames 中添加实际名称；仍须满足默认武器技编号等检查。

需要兼容当前 PC 游戏的 UE4SS，支持本脚本使用的蓝图钩子、LoopAsync 和 ExecuteInGameThread；本包不含加载器。

2. 将包内 Project_Plague 文件夹合并复制到游戏根目录。

3. 确认存在 Project_Plague\Binaries\Win64\ue4ss\Mods\QiyunRearStep\Scripts\main.lua。

4. 保留 enabled.txt 和 Scripts\QiyunRearStartup.lua。启动保护依赖已随包提供，不需要作者的 shared 文件夹。

5. 若 mods.txt 明确禁用 QiyunRearStep，请将对应项改为 1。

6. 重启并进入存档，装备齐云初雪，锁定安全平地附近的普通敌人，施放默认武器技测试。

无需额外 PAK，也不需要旧版基础包。升级前备份原文件夹，不要同时加载改名副本。

退出游戏后编辑 Scripts\QiyunRearConfig.lua，修改后重启。

Enabled = true：总开关，false 时保留原版技能、不执行额外绕背。

Duration = 0. 65：路线时长参数，秒。

MaxDistance = 350：最大初始目标距离，厘米。

MaxPath = 650：额外路线长度上限，厘米。

MaxSpeed = 1100：移动速度上限，厘米/秒。

RearDistance = 115：期望背后距离，实际还受双方碰撞体及间距限制。

Debug = true：当前开启路线诊断日志，可设为 false。

其余参数控制启动等待、碰撞间距、地面高差与目标移动/转向容差，不建议未经测试大幅放宽。

可能与修改同一武器技、根运动、锁定或角色位移的 Mod 冲突。

退出游戏后移走 QiyunRearStep 文件夹即可卸载，不需要回滚存档。

本包保留当前实验版玩法，仅将启动依赖改为包内独立模块名。已检查 Lua 语法、依赖、文件一致性和 ZIP 完整性。

原说明记录过本机绕背完成及受限取消，但不代表所有敌人/地形稳定，也不保证不会出现闪退；本次打包未重新实测。

遇到问题请提供 UE4SS.log 中 记录，说明敌人、地形、武器名称和操作过程。

不包含个人记录、备份、SHA 校验文件或其他 Mod。

========================================

Starting Longsword — Automatic Rear Step for Flash Slash

QiyunRearStep v0. 1. 6 Experimental

Description

Adds automatic rear-positioning movement to the default weapon skill of 齐云初雪 / 齊雲初雪, the starting longsword. Equip the weapon, lock onto a nearby enemy, and successfully activate its default skill; the mod then attempts to move behind the target along an available route.

No new hotkey is required. Parry echoes, avatars, pets, and mounts are not included. English labels here are descriptive translations rather than verified localized skill names.

• Checks the displayed weapon name, upgrade suffix, default skill ID, casting state, and longsword skill animation.

• Attempts rear positioning over a default route duration of approximately 0. 65 seconds, with an initial target distance limit of approximately 3. 5 meters.

• Checks ground support, height changes, collision, and target movement/turning. Stops extra movement if conditions fail.

• Restores the mod's temporary root-motion changes on completion, interruption, death, loss of lock-on, or weapon changes.

• Does not change damage, feather cost, cooldown, or animation speed, and does not directly trigger a rear break.

• Not a teleport or guaranteed backstab. Enemy turning, movement, size, and terrain can prevent completion.

Supported Weapon and Language

The default configuration recognizes the Simplified/Traditional Chinese displayed names 齐云初雪 and 齊雲初雪, including a trailing +number upgrade suffix.

This is not a universal modification for every longsword or weapon skill. For another game language, add the actual displayed weapon name to WeaponNames in the configuration; the default skill ID and other checks must still match.

Installation

Requires compatible UE4SS supporting the script's Blueprint hooks, LoopAsync, and ExecuteInGameThread. The loader is not included.

1. Fully close the game.

2. Merge the archive's Project_Plague folder into the game root directory.

3. Confirm Project_Plague\Binaries\Win64\ue4ss\Mods\QiyunRearStep\Scripts\main.lua exists.

4. Keep enabled.txt and Scripts\QiyunRearStartup.lua. The startup guard is included locally; the author's shared folder is not required.

5. If mods.txt explicitly disables QiyunRearStep, change that entry to 1.

6. Restart, equip the supported weapon, lock onto a nearby regular enemy on open ground, and test its default weapon skill.

No additional PAK or older base package is required. Back up before upgrading and avoid renamed duplicate copies.

Configuration

With the game closed, edit Scripts\QiyunRearConfig.lua and restart.

Enabled = true: enable extra rear-positioning movement; false leaves the original skill intact.

Duration = 0. 65: route duration parameter in seconds.

MaxDistance = 350: maximum initial target distance in centimeters.

MaxPath = 650: maximum extra route length in centimeters.

MaxSpeed = 1100: movement spee