China Railway (CZ2602) No. 18 Swingnose crossing

Warning! This work is only published in TPF2 Workshop and you are not allowed to use it for any other commercial purposes. No means or tools shall be used to extract, export, or transplant the models in this work to any game. 本模组最终解释权归属布里啾啾车辆厂aoxiang分厂 Please pay attention! Please check in advance whether the required-item is loaded. If the required-item is missing or not updated, this mod will not run! Introduction On a fixed railway crossing, the wheels need only drift by a small angle, say 1 in 20, before the vehicle may start to go in the wrong direction at the V of a V-crossing. This problem can limit the maximum speed of vehicles using the crossing. In addition, the open gap at a fixed V-crossing forms a weak point on the railway line where the heavily loaded wheel must bump across the resulting gap of about 10 cm (4 in), supported only by the portion of the wheel tread which is on the wing rail. This pounds the rail so much that the steel can deform and/or wear away. This damage may easily spread to other components including the wheels, and the noise can be a nuisance. Scheduling repair of damage can also be a problem in high traffic locations. Swingnose crossings virtually eliminate the gap at V-crossings allowing for higher vehicle speeds. Available：2000 How to hide the depot icons？ This mod used the depot animation so the dpot icons will be a little inconvenient. You can hide the depot icons like this: ↓↓↓↓↓↓ 实际运用 If you have any questions or bug feedback, please let me know in the discussion or comment section. Please use English or Chinese, which can help me understand your meaning faster. Thank you!