SMN Solstice

# Transmitter channels used 1 - Toggle primary scrappers 2 - Toggle secondary scrappers 3 - Toggle SCUs 4, 5, 6 - Cycle magnets to rotate in a 123212321 pattern to move blocks back and forth across the scrappers to evenly distribute them 7 - Toggle active gyros 8 - Toggle passive gyros 9 - Signal used to tell furnaces whether or not to burn resources (Battery % cutoff value is changed manually) 11 - Enemy detection toggle state # Keybinds 0 - Toggle automatic firing of the HE lasers 1 - Toggle primary scrappers 2 - Toggle secondary scrappers 3 - Toggle SCUs 4 - Toggle magnets 5 - Toggle cycling of magnets 7 - Toggle active gyros 8 - Toggle passive gyros 9 - Signal used to tell furnaces whether or not to burn resources (Battery % cutoff value is changed manually) Bubbles, Hovers, Antigrav and Pacemaker setting is done manually atop the bridge. The scrappers come in two sets, the first is a very efficient set that makes sure all unrefined resources get refined, and the second set can also be activated to increase the speed of scrapping but does not pass unrefined resources through refineries, and does not necessarily mean resources will go to the furnaces. Set the battery percent for when to stop allowing resources through to the furnaces using the value block hidden underneath the gold GSO 1x1 armour plate on top of the bridge on the left. For the engine glow, the colour can be adjusted by switching the value block on the sides next to the colour pixels between {0, 10, 100}. (For personal notes, the max speed is next to this, behind the flipped around GEO 2x1 armour plate and is /7) The odometer is in the back-middle of the ship. The value blocks above it are for saving the current distance travelled by taking a snapshot of the tech with it. The odometer tracks metres travelled. It uses this display - https://steamcommunity.com/sharedfiles/filedetails/?id=3628248120 Inspired by KN's Grunvol - https://steamcommunity.com/sharedfiles/filedetails/?id=3233981831 Known iss