Real-time Clock

This is a clock circuit that can display your current time in real-time. It uses the military time format to display and receive the time. On the bottom right, use the two input blocks to input the current time and hold right mouse button on the button to set the time. The left input block represents the hours and the right input block represents the minutes. The time can be seen on the displays at the top left. Warning: Do not press the button to set the time twice. It will cause the clock to count time at twice the speed. Tip: It is recommended to input a time one minute later than the current time and to press the button right after the time changes. This will allow the clock to be as accurate as possible. You can convert standard time to military time by considering the hour as 0 at 12 AM, or adding the hour to 12 if the time is 1 PM or later (but not 12 AM, otherwise the former applies.) Otherwise, if the hour is or is in-between 1 AM - 12 PM, the numbers would be the same. Examples: 12:20 AM = 00:20 2:40 PM = 14:40 12:30 PM = 12:30