StarCraft2 Odin

used only skin and weapons mods -- How to walk-- This robot has six control modules. >> Body, cannon backpack, walk control, left leg, right leg, left foot, right foot All these cumbersome procedures are to prevent joint misalignment as much as possible. So Payload should come up with a crank and piston that can also work in story mode. 1. Press x to separate parts 2. Go to body control, be sure to turn off the anti-gravity engine. 2-1. Press v to start solar charging. For quick charging, use the switch on each part to turn off the protective and repair 3. Go back to the foot controls and press w and the down arrow to set them to back-and-forth movement 100 and vertical movement -100 respectively. ( both feet) 4. Go to the leg controls, press w to set it to back-and-forth movement 100. (both legs) 5. Go to the walk control (collection of white boosters inside the torso) and press the control key and the robot will walk. 6. Pray that the leg joints do not displace or dislocate. -- how to use canon backpack--- 1. Select the backpack control. 2. press w to set to 100 3. Press the control key intermittently and briefly to lift the backpack upwards. Never press and hold a key. 4. When lowering the backpack, press the s key to return the setting to 0. -- robot direction -- 1. Move to the body and press v. And press the up arrow to make it vertical movement 100. 2. Continue holding w on feet control to make -100 to 100. 3. Select the leg control and press the up arrow to set it to 100. 4. Go back to body control, switch on the anti-gravity engine. 5. Turn body left or right. caution 1. When stopping the robot from walking, stop when the right foot is as far forward as possible. 2. When a slight twist is seen or something is caught and the walking control part does not rotate well, Go to Body Controls and lightly press the Control key to slightly raise the robot. legs may be aligned correctly.