Ope Collector

This is a resource collector and transporter. I have started using this to move resources when I need to move my anchored base or sometimes to harvest I like using Ope Mobi Fab Apex most of the time. First thing - When you first load in this tech look to the top middle of this tech and change the settings on the GSO pacemaker to turbo this will speed up pickup and drop off. Flight - With thrusters this tech moves at just over 100 mph however it is not a good idea to use them with a full load particularly with resources on top. If resources are moving around, you may want to stop until they have settled, trying to move while resources are move may cause the tech to jerk is unfortunate ways. Pressing B quickly can help to prevent crashes if your close to the ground and this happens. Collecting - When collecting resources the bottom 8 silos will fill up first once they are full the upper silos will fill. All burnable resources will be burned that enter the upper silos. If your collecting burnable resources, either remove the 8 generators from the top of the tech or drop off resources once you fill the bottom 8 silos. Use the up and down arrows to gain or lose height. Drop off - Doing this is rather simple hover over the point where you want to drop off. Change the two most forward filters on the sides of the tech pointed at the droppers to filter all. Then turn the rear most filters on the sides of the tech pointed to the droppers to filter all. It will then dump all resources to the ground. When done dropping change those four filters settings back to filter nothing. Troubleshooting - If you accidentally change the conveyors to the wrong direction and cant fix it just reload the tech.