Firewall & Emergency Bulkhead

This Firewall Bulkhead is a total-base-integrity solution designed to prevent catastrophic chain reactions. Unlike standard doors, this system operates as a passive hallway connector that transforms into a high-security airlock and containment zone the moment a breach, fire, or atmospheric shift is detected. Protect your base from accidental deconstructions, thermal runaway, and toxic gas leaks. Passive Throughput: In "Safe" mode, doors remain open for maximum player mobility and flow. Active Containment: Instantly seals the hallway and enters Emergency Lockout if any sensor parameters are exceeded on either side of the bulkhead. Hybrid Logic: Seamlessly switches from a simple hallway to a fully functional Emergency Airlock, allowing players to transition between a compromised zone and a safe zone without further contaminating the base. Integrated Hazard Detection The IC10 logic monitors both "Side A" and "Side B" for: Pressure Loss: Automatic seal during depressurization or hull breaches. Thermal Protection: Closes if temperatures exceed safe limits (Too Hot or Too Cold). Fire Suppression: Immediate lockout upon detection of combustion. Atmospheric Integrity: Scans for unbreathable mixes or toxic gas infiltration. Emergency Features Manual Exhaust Override: Includes a dedicated exhaust vent control during Airlock Mode to purge contaminated or high-pressure gases before entering the safe zone. Integrated EVA Station: Built-in emergency suit storage for players caught on the "wrong side" of the breach. Smart-Recovery: The system evaluates atmospheric stability before returning to "Passive Open" mode, ensuring the hazard is fully cleared. Setup: Sensor outside each door and one for the airlock Exhaust vent and logic lever Map Screws - D0 DoorA - D1 DoorB - D2 Airlock Sensor - D3 VentA - D4 VentB - D5 Exhaust Vent Place LED's (optional)