Weather Alert - Lights and Sound

This IC10 Script was created to alert when the Weather Station noticed a Storm was Incoming. You do not need the StationeersLaunchPad Plugin Mod. Change Log: =========================================================================== Version 2 - - Added the ability for a countdown timer for when the storm will hit. (recommend either in Seconds or Minutes) -- Comment added to where this change should occur. - New items added for "What You Need" if you want a Clock Count Down Timer! -- This will look for all three LED Display (Small/Medium/Large) and it being renamed with the labeler to the name "WeatherClock" WeatherClocks will show a count down timer in Positive Seconds when the storm is incoming, Negative time shows how much time has passed since the storm has started. =========================================================================== Version 1 - Initial Script =========================================================================== This Script should run on your main power line to cover the most of your base. The connection will break if you use transformers in your base. I would recommend at least branching off the main line where your IC Housing and IC10 chip are to attach the peripherals. The script was built to look for 4 different lights and a Klaxon Speaker with certain names using the labeler. !!!!!! Minimum Shopping List !!!!!! -- What you need: - Main Power Line - Weather Station - Computer or Laptop with the IC Editor Motherboard - Circuit Housing (d0 set to the Weather Station) - IC10 Chip - 3 Diode Lights -- I chose these colors, but you can change them with spray paint as you see fit for your needs/playstyle, the name is what matters the most in the script: --- Green - Renamed to: wLightClear --- Yellow - Renamed to: wLightStormIncoming --- Red - Renamed to: wLightStorming - 1 Klaxon Speaker -- Renamed to: wAlarmStormIncoming - 1 Flashing Light -- Renamed to: wLightSpinStormIncoming - 1 LED Display (Small/Medium/Large) What this IC10 Scrip