Universal Generator Control, Battery and Wattage Display

Generator & Battery Master Control + Status Display A simple, universal IC10 controller and information display for your base power system. This script automatically manages your generator(s) based on battery charge level, while also displaying clear, real-time power stats. 🔌 What It Does Automatically turns generators ON when battery charge drops below a set % Automatically turns generators OFF when battery charge reaches a set % Works with large and small batteries Supports up to 3 generators (Solid Fuel, Gas, Stirling, etc.) Includes a manual override switch so you can run generators anytime you want Provides detailed power readouts on LED consoles Color-coded display for charge vs discharge states All features are optional — customize the setup however you like. 📊 Display Information Battery Charge % Total Stored Power (kW / MW / etc.) Incoming Power Outgoing Power Color Status Red / Yellow = Discharging Green / Blue = Charging ⚙️ Generator Support Controls up to 3 generators Solid Fuel Generators auto-trigger by batch command (So don’t waste a generator control pin on them unless you want to) 🏗️ Optional Device Pins d0 – Active Vent (great for purging small rooms) d1 – Alert Light (turns on when generators are running) d2 – Cable Analyzer (battery input side – required for watt display) d3 – Cable Analyzer (battery output side – required for watt display) d4 / d5 – Generator #2 & #3 Use only what you need — everything else works without them. 🧾 Required Naming (for displays to work) Display Type Name Battery % Medium Console LED Percent Stored Power Small Console LED Stored Input Power Small Console LED Input Output Power Small Console LED Output 📝 Notes Designed to be modular, flexible, and simple Works on any base layout Saves fuel Override switch available for manual control at any time If you want a clean, reliable, fully-automated base power controller with clear visual feedback — this script is for you. Enjoy!