Easy Gas filtration

IC10 Auto Gas Cooler Controller - How to Use This IC10 script provides automatic temperature control and filtering management for gas processing systems in Stationeers. It detects the type of gas filter being used and automatically controls the appropriate cooling system while managing bypass valves based on gas availability. Features Auto-detection: Automatically detects filter type (CO2, O2, N2, Pollutant, Volatiles) and switches to appropriate cooling system Temperature control: Maintains gas temperature between -5°C and 0°C to prevent condensation Smart filtering: Only runs filter when target gas is detected in input source Pressure safety: Automatically shuts down when output pressure exceeds 40MPa Bypass management: Opens bypass valve when no target gas is present or during shutdown Series operation: Designed for multiple filtration units operating in series with automatic bypass Required Components Direct Connections to Filtration Unit: IC10 chip: Insert directly into the Filtration unit (db connection) d0 (Data Pin 0): Diode Slide (shows filter life remaining - 50% = one filter consumed) d1 (Data Pin 1): Input gas tank OR Pipe Analyzer on input pipe Network Components (connected via Data Network): Each gas type requires its own set of components with specific network names: For CO2 System: Volume pump named: CO2 Cooler Pump Digital valve named: CO2 Cooler Valve Digital valve named: CO2 Bypass Valve For O2 System: Volume pump named: O2 Cooler Pump Digital valve named: O2 Cooler Valve Digital valve named: O2 Bypass Valve For N2 System: Volume pump named: N2 Cooler Pump Digital valve named: N2 Cooler Valve Digital valve named: N2 Bypass Valve For Pollutant System: Volume pump named: Pol Cooler Pump Digital valve named: Pol Cooler Valve Digital valve named: Pol Bypass Valve For Volatiles System: Volume pump named: Vol Cooler Pump Digital valve named: Vol Cooler Valve Digital valve named: Vol Bypass Valve Setup Instructions Build your cooling system: Conn