Re-Volt

⚡ Re-Volt ⚡ Re-Volt is an electrical overhaul mod for Stationeers, which mildly overhauls how power is distributed, what happens when things go wrong, and gives you more tools to control your power! WARNING:This is an SLP Plugin Mod, ensure you have it installed! 🔌 Features NEW! Optoisolator and Data Diode: Connect data networks together while keeping power separate. The Optoisolator is a 4-network bidirectional link, and the Data Diode is a two network one-way link Cable Tray: Why spend a ton of space keeping all those cables separate? With a Cable Tray, you can run many different cables together through a tray, taking up less space and fewer objects. Trays connect cables with matching colour and watt limits. Load Centers! With the new Load Center structure, you can control entire sets of devices without needing a separate power network. Turn your lights, atmospherics, doors, equipment, or logic devices on and off en masse - and also supports data networking, with a secondary data port. Electrical load is now proportionally shared among all sources on a cable network! No longer will you have to deal with one battery draining while the others are completely full! And even better, this goes the same for charging them. One battery won't hog all the power! Wires no longer burn out instantly! Instead, wires will burn out with a random chance, based on how much you're overloading them. It never made sense that a cable which could carry 5,000 watts continuously would violently rupture in half a second when carrying 5,001 watts. And now it doesn't. Stationary batteries are now charge- and discharge-rate limited. A single battery isn't going to take 100kW anymore, and these babies can discharge a fair bit quicker than they charge. You might need to re-design your power distribution, or use a few more batteries in parallel! Circuit Breakers! Like fuses, with a greater degree of control over the specific trip point - and which, after tripping, can be reset without having to