Automated Greenhouse Climate & Safety Control

This MIPS script provides a automated climate control system for a sealed greenhouse or habitat in Stationeers. It is designed to maintain ideal growing conditions for plants while protecting your base from catastrophic pressure failures. This assumes that you have brought in Oxite and CO2 yourself and have cleared out the pollutants The script uses a state-machine architecture, prioritizing safety above all else. It will automatically manage heating, cooling, and two separate tiers of pressure safety to keep your station from exploding and your plants alive. ----- Features ----- Automated Temperature Control: Keeps the room within an ideal temperature range (22°C to 27°C) by automatically switching between heating and cooling cycles. Active Circulation: Utilizes two sets of active vents for a powerful push-pull circulation system, ensuring efficient temperature exchange. Pipe Pressure Safety: Monitors the pressure in your circulation pipes. If it gets dangerously high (e.g., from a blocked vent), it will automatically reverse airflow to vent the pressure back into your room, preventing pipe bursts. Room Over-Pressure Safety: Monitors the main room pressure. If it gets too high (e.g., from the pipe venting), it will activate a dedicated external vent to release pressure safely to the outside atmosphere. Power Efficient: An idle state ensures that when conditions are perfect, all climate devices are turned off to conserve power. ----- Required Items & Setup ----- For this script to function, you must build the following system and name the components exactly as listed. ----- I. Logic & Control (1 of each) IC10 Housing with an Integrated Circuit (IC10) chip running this code. Gas Sensor (placed inside the greenhouse to monitor the room). ----- II. Climate Hardware Air Conditioner (1) Pipe Heater (1) Placement: Must be on the Waste/Coolant Loop. Radiators (as many as needed) Placement: Must be on the Waste/Coolant Loop, preferably outside. ----- III. Pipe Analyzers (3