AF Temp Control

IC Housing - Temp Control rooting d0 = Advanced Furnace d1 = Activity LED d2 = NoDevice d3 = Fuel Valve d4 = SuperFuel Valve d5 = Coolant Valve This script works with my Advanced Furnace Recipe Control. https://steamcommunity.com/workshop/filedetails/?id=3467899122 Unfortunately, you have to press the buttons several times until the LED lights up. Depending on the length of the code, pressing the button is not always recognized. Fuel and Cooland Setup: You need a Fuel Tank (33/64 - Mix) and a Coolant Tank (Nitro) 2x Digital Valves which run together into the Input. I recommend putting a one-way valve in front of the digital ones. Worth mentioning: The temperature when creating Stellite can be reached if the circumstances are right. It is easier to create an input chute (preferably at a location in an environment where it does not matter that volatiles may be created, unless of course you like fire in your base) and help with volatiles and oxy ice. The pressure is still equalized directly. Recipe Control: With a dial you select the recipes which are then displayed from the IC with a hash display. The start button starts a recipe in the temp control, the stop button sets the recipe to zero and the temp control to idle mode. When a recipe is finished, it is automatically ejected. The purge button can also be used to eject the reagents at any time or to use the heat for further runs. It is best to connect a hash display to the furnace as well. Recipe 1 Iron Hash represents all base recipes. (Just updated that all basic recipes now are ejected when ready) Temp Control: When a recipe has been started, the corresponding min and max values are set and controlled. in the meantime, the LED is on and turns orange (its just off and white in Idle). As soon as it is ejected or canceled, the Temp Control goes into idle mode and only regulates the maximum pressure to keep it below 40 MPa. EDIT: I just added an extra valve and REORDERD