Turbo Melter

A faster way to melt ice than ice crushers.​ Can melt as much ice as you can throw at it and generates electricity as a byproduct. The only bottleneck is your pipes bursting when they reach their max pressure. A workaround is to use a small or large tank on your pre-filter line. How does it work? Ice is fed into a steel (must be steel) chamber via chutes. A gas Fuel generator is used as a rapid heater which is able to keep the chamber hot enough to rapidly melt as much ice as you want. Once the pressure rises above 30kpa, a large powered vent will suck everything into your filtration network. The generator is set to not overheat the chamber so that your gases don't get too hot. An optional passive liquid drain can be added if you feed a section of your filtration pipe into the chamber and attach the drain to it. This will allow you reclaim and re-vaporise any liquid floating around in your network. You can use a blast door for easy access. In order to use this for water ice, you'll need to add a passive liquid inlet to the chamber. However I don't recommend this unless you only use this for water. Your water supply will become contaminated otherwise. As an included bonus in the script, there are 3 optional ice crushers that have been set to 0 degrees, so they don't need to preheat. They function as they did before The Rocket Update. Just delete the # on the specified lines of the script to use one or more of the ice crushers. Instructions are inside the script.