Universal HardSuit Tuxedo type

Universal HardSuit Tuxedo type This code uses ideas and even pieces of code from Hard Suit Automaton HiPr v1. 3 by swagman Automatic suit control + built-in beacon by NUCLEAR_BOMB Automated Helmet & Suit Logic by kaikosma Special thanks to G-Man for help with the 7th Function of the suit. The code contains: 1 Automatic turn off of the flashlight after 300 seconds. 2 Automatic closing of the helmet. The helmet closes at pressures below 75 kPa and temperatures beyond 1-49 degrees Celsius. 3 Control of air conditioner operation to save charge and filters. 4 There is a mode for a hot atmosphere with oxygen leakage control. Switching the mode is done by selecting the desired temperature of 20 Celsius or more - normal mode, lower and the mode for hot atmospheres will turn on. 5 A navigation system that shows the distance to the base and the direction to it. When unlocking the visor, the desired pressure will show the distance to the house, and the desired temperature will show the direction in degrees. After 2 seconds the mode will turn off and the helmet will be locked. 6 If toxic substances are detected in the suit, an emergency release of the atmosphere will be carried out. This option can be disabled. 7 When you enter home, the helmet will open. When the chip is installed in the suit, the location will be remembered and when it hits that location again, the helmet will try to open. During any action with the cells of the suit, it doesn’t matter if you put it in a cell or took it away, the suit will reboot and remember the new home point. Therefore, pressure and temperature checks have been added. This option can be disabled. You can specify the coordinates of your home point in code. To do this you will need a tablet with a GPS cartridge. All constants that can be changed, turning off modes, and program variability for manually entering a home point are marked with comments in the program code. The best place to stand is to insert the chip into the suit, one step away