(Probably Obsolete)J's Hydroponics Controller

This script controls lighting for Hydroponics Devices\Stations. It applies error codes to the body of the IC Housing for a variety of faults and non-ideal planet conditions. It can also be used in conjunction with console LEDs and/or a gas sensor to expand its capabilities and feedback. Be advised, this version of the script has only been tested on Potatoes and Tomatoes, on the Moon, with default options. Comments and feedback appreciated. -1 Hydroponics Device has no plant to monitor. Light defaults on. 1## ------- Plant is probably growing, tenths place is growth stage 1 through 5 16# ------- Plants has fruited, but will never produce a seed. 1#1 ------- Light is off and plant efficiency decreasing 1#2.### - Light is off with countdown to turn light on in decimal place 1#3 ------- Light is on and efficiency is increasing 1#4.### - Light is on, plant efficiency decreasing, but delaying turning light off. Countdown in decimal place. 200 ------ Plant has finish growing and has a seed 501 ----- No hydroponics device set 502 ----- No grow light set. If using a Hydroponics Station, just set the station in both slots. 503 ----- Water pressure critical 504 ----- Water temperature critical 505 ----- Air contains too much Pollutant(guessed) 506 ----- Air contains too much Volatiles(guessed) 507 ----- Air contains too little CarbonDioxide(guessed) 508 ----- Air pressure critical 509 ----- Air temperature below ideal The next function I might add, is the ability for the script to track how much light a plant is getting, including natural light received.​