Adjustable Grow Lights automation

Control grow lights activity with dials. Monitor selected amount of light and darkness in minutes from LED displays.​ You have two dials and two LED displays. With the first dial you control at what hour you want the lights to go on. In example 6 at sunrise, 12 at noon, 18 at sunset, 0 at midnight. With the second dial you control at what hour you want the lights to go off. The both LED displays will display exactly calculated amount of real time minutes in light and in darkness according to your settings. Note: The script is not using sleep timers. That means you can make changes anytime and they will instantly apply. In example, if you have selected light period between 17 in the evening and 7 in the morning and now its 18 (sunset) the lights will be on because you are now in between the start and the end time. If you change the start time say to 19 the lights will go off instantly (will not wait until sleep timer is over) and then will turn on at 19 (1 hour after sunset). SETUP: (read carefully) 1. Mount your grow lights where you need them. As many you want. 2. Mount a daylight sensor outside vertically on the wall with its data port pointing down, so that when you face the sensor sunrise is on your left hand side. On MARS it is the north wall. On other planets may be different. 3. Mount two dials (logical switch kit) anywhere you like. Set max value for both with screw driver to 23. Use the labeler to give them different labels. One will be controlling when the lights go on, the other when they go off. 4. Mount two LED displays (console kit) anywhere. Label them. One will indicate selected light time per day in real time minutes, the other selected darkness time. 5. Mount an IC Housing anywhere. Label it (optional). It will be your grow lights controller. 6. Connect everything to same network. Grow Lights must be on the same network. The program will control all grow lights on same network. 7. Configure IC Housing using a screw driver as follows: d0: daylight s