BatteryPowerDisplaedInColorsAndSounds

Code for showing and coloring the Capacity of the Base Batteries in W and % When ​the batteries charge will drop the colors on displays are changing. Necessities> at least 1 base battery 1 IC chip housing with the IC chip/memory inside 2 batch readers set to read maximum battery charge and actual charge 1 klaxon 2 displays couple of chutes leading to solid generator input hole 1 solid generator with chutes filled with coal. it will be used in case of emergency - when battery charge is below 1% it will use 1 pc of coal (10 sec burn) This script do a simple thing A. it reads what is the BASE BATTERIES actual charge, and shows it on the displays in 2 forms, as Watts and in percentage. B. color the numbers on these displays in various colors, depending on percentage of the charge. C. when the charge of the whole battery field drops below 1% of overall max charge possible, the script automatically kicks the solid generator and it will charge the batteries for 10 seconds by burning the prepared coal in chutes leading to the solid generator (the time can be changed in the code - line 58 "sleep 10") D. solid generators need to have a system of short chutes leading to its input hole and the chutes need to contain at least a single coal to work. E. when battery charge will drop under a certain percentage the klaxon will sound an alert. I implemented 2 types of alerts. one is below 1%, it signalise until the solid generator is burning the coal and the second type is played only once when threshold trigger is crossed under 10% Colors used for displayed percentages and Watts also BattCharge <= 1% .. pink 1% < BattCharge < 10% .. red 10% < BattCharge < 30 % .. orange 30% < BattCharge < 55 % .. yellow 60% < BattCharge < 90 % .. green 90% < BattCharge <= 100 %.. Purple Script is fully commented for better understanding all its important parts. In the code there is implemented a simple SWITCH case decision tree.