Rocket Controller V3

I have adapted CowsAreEvil's rocket script with pre-flight Refill and automatic unload of silos. This will work with multi silo/tank craft. Set the max fuel amount appropriate for your rocket with any line that has fuelVar 10000.​ 3 storage tanks filled and left the ship with around 2k fuel usually. 1 logic housing and ic chip 1 lever to continuously set the return mode until the rocket code reads through a full cycle to send the rocket back 1 button for launching the rocket 1 volume pump to pull fuel from a storage tank to the rockets builtin tank. 1 batch reader sum mode to read total silo item count if !=0 on landing sends a code to the silos to open untill =0 1 batch writer to open the tanks so they empty the contents in to the pipes/convayers attached to the scaffolding. 1 MED display 1 batch reader sum mode 1 logic writer 1 MED display 1 batch reader sum mode 1 logic writer 1 MED display 1 logic writer 1 logic reader [ Rocket Mode display] 1 MED display 1 logic reader 1 logic writer [ Sector Miniable items yes/no] D0 is the Automated control module D1 and D2 are the button to launch and the lever to return. D3 is the volume fuel pump to automatically reload the rocket on landing. D4 and D5 are Batch Reader and Writer to allow for multi silo status. you may be able to use a batch read via hash to free up those 2 pins . CowsAreEvil used that option to turn the miners on and off so should be doable. the screen shot of the med canisters is where the volume pump pulls fuel from to fill the rocket the pipe gage goes to the mixer on a separate network and turns the mixer on or off when the pipe pressure goes below 5mp so the rocket will fill quickly. All the gauges used are via logic as CowsAreEvil has in his video to allow enough pins to manage the fuel pump and logic. the mode and miniables are read from the automated control module