Smart Rocket Control 3.0

Universal script for Automated Mining Rocket (any proper configuration). Controllable and fully automated if need. Tested on the rocket with 3 silos and 6 mining modules. If you'll made logistic system for unloading without jams, just keep silo control lever open and uncomment line 41 Every rocket should be in separated network and have a set of control elements desctribed in a hash block. Now it is: 1. Small LED Panel will show the Fuel level 2. Medium LED Panel will show the current mode and amount of collected goods in format of YXXX, where Y - current mode, XXX - total silos quantity 3. Dial as control of desired amount if fuel to fill. Will be multiplied by 100. So 30 will be desired 3000 4. LED as control of launching or indicator that rocket in the active phase. Just turn it on to launch. Turn it off manually and rocket will return back 5. Lever as control of Silos unloading. Keep it open if you need fully automated flights 6. Pump as fueling pump. Due to script using batch read/write commands to control, better to avoid have another devices of same types but different logic. Otherwise they will be used as a mirror devices (all small LED panels will display fuel, medium ones - state, any opened lever will start unloading silos etc) Rocket design is very important. Dont forget that next to every mining module should be silo and right direction coupler module. For my case it was: Engine, Fuel Tank, 1st Miner, Coupler UP, Silo, Coupler Down, 2nd Miner, 3rd Miner, Coupler UP, Silo, ..., Coupler Down, 6th Miner, Rocket Head. But of course you could use as many mining modules as you need.