AIMeE Unchained ~

As the title says the script i've written works pretty great. I came up with a workaround to the Y axis issue causing AIMeE to try to fly or burrow ( Basically where the rover gets to the way point and spins ). Anywho this is the save with my Auto-Ingot/SuperAlloy Smelting setup so have fun and pick any of it apart to your delight :) Any and all of my scripts are complete freeware so by all means copy/paste any or all of it and re-upload if you've made improvements. Credit for my MIPS Programming as always rests solely with CowsAreEvil (Mick), if you haven't checked out his youtube channel you are missing out. Its the best Stationeers content and Mick is very entertaining to watch! Ok onto the AIMeE setup we have here - Most of it has signs up for operations etc but ill lay it out. You can adapt this script to any location AIMeE can roll in ( Anywhere without holes :p ), just change the defined GPS coordinates to suit your needs. The unload coordinate is easy enough, Waypoint1 is in the airlock where AIMeE will wait until the Gate opens to proceed. Waypoint2 is a distance away from the base to offer more area for the rover to proceed to the set mining location All 4 AIMeE's pass through and Airlock into a Freezer so there is no loss of Ice when unloading during the day. The Recall Lever for each AIMeE is their On/Off switch essentially. When its pulled they will return, empty and power down until you put it back. With that the weather station outside will trigger on a NextWeatherEventTime and pull the Master Recall Lever. This will not auto reset once the storm is over. The Mode on the Weather Station seems to stay at zero for me so i can only tell when a storm is coming - not when its over. If you know something i don't please share :) If any AIMeE gets below 30000 joules or runs out of mineables in their designated mining area they will also return and shutdown. When setting new mining locations keep in mind their individual 'Waypoint2 X and Z setting, when you ma