Power controller V2

Power manger that will control: Dual axis solar tracking. Battery readout. Backup generator. It will control all attached solar panels (Regular, heavy, dual or single input) It will read all attached batteries (Large, regular) It will control all attached generators (Coal or gas) Connection: d0: Daylight sensor (Alignment must match solar panel alignment, see pictures) d1: Display/mirror (depending on setup) (Optional) The display will show the current combined charge of the batteries connected. Display colour: Green - Charging Orange - Discharging Red - Generator not working (No coal/gas) Note: for single input solar setup you will need a logic mirror set to the display and connect the mirror to d1: Photo 1 and 2 setup for dual port solars. Photo 3 and 4 setup for single port solars. Make sure the data port for the IC is connected to the solar circuit. It does not matter which way the solar panels face as long as the sensor is oriented the same direction as the solar panels. Set your solar panel to 100% vertical and zero horizontal. Place the sensor with the data port facing where the solar panel is facing. All of the panels using the same sensor must be facing the same direction.