advanced furnace 1 IC

This setup uses the idea from TryCatch and adapts it for the updated Alloy Recipes. The Main advantage is that it features active cooling via CO2. Be aware that the IC-Chip needs to be programmed two times. The first program is only the Stack which contains the recipes. The second program contains the statemachine. d0 - Dial d1 - Lever d2 - LED light d3 - Furnace d4 - CoolPump d5 - FuelPump Dail: 0 constantan 1 electrum 2 invar 3 solder 4 steel and normal ingots 5 astroloy 6 hastelloy 7 inconel 8 stellite 9 waspaloy Happy smelting the code is on github: https://github.com/ItchyBoi/stationeers/tree/master/Advanced%20Furnace Below the Text from TryCatch and his Workshop: Benefits: - single circuit solution - automated pressure and temperature control - quickly melts all known alloys and ingots in a safe way - automatically ejects alloy when ready - moderate fuel consumption - looks pretty good and friendly :) Disadvantage: you need to build pressurized room with elementary cooling system for it. Otherwise it will work rather unstable. Setup 1. Build room around furnace and cooling system - at least one passive vent on the inside and one radiator on the outside, connected to the same pipe(see picture). An active vent is also be useful, or any other way to change the pressure inside the room. Add chutes and style as you like. 2. Connect devices in one network - IC Housing, Advanced Furnace, at least one Console with Hash display motherboard, LED light, Lever and a Dial. Set devices on IC Housing screws(see picture): d0 - Dial d1 - Lever d2 - LED light d3 - Furnace 3. Insert data disk into console with hash display and select IC Housing - it provides picture for selected recipe. Not necessary, but if you have two more consoles with gas display motherboard - insert data disk into it, select furnace and choose mode to display(pressure or temperature). 4. Now, the complex part: Before turn it on, you need to achieve pressure below 20kPa inside the pressurized room. After fu