Basic Filtration Control

This chip will power on a filtration unit when a Pipe Analyser reports the gas specified by an installed filter has reached a specified value, and power it off again once it has filtered down to a specified amount. By default, the filtration unit will power on when the gas ratio in the pipe is at 10%, and power off when there is no more of the specified gas in the pipe. Modify MinRatio and MaxRatio parameters to preference, to control the gas ratio required before the filtration unit will power on and off. (MinRatio - Turn filtration off at this amount) (MaxRatio - Turn filtration on at this amount) A filtration unit may use more than one filter type, and both will be detected. Currently, only normal (small) filters are auto-detected due to maximum length a program can be.​