HoTV Green House Control

Hello everybody. Today I have a new program for you. It is used to control and monitor your greenhouse. It provides a pressure of 75 kPa. and a temperature between 20 u. 30 degrees. If the pressure becomes too low, it controls the outside temperature and if it is within the tolerance value of more than 15 degrees, it attracts through a filter system from the outside atmosphere. if the oxygen content in the greenhouse rises above the tolerance value of 60%, it draws the atmosphere and directs it via a filter unit into your tanks, for example. So in the greenhouse you always have enough oxygen to breathe 30% and the plants can grow in peace. All you brought is a sensor in the greenhouse, one on the outside. a filter for Co2 from outside to inside. a filter that filters oxygen from the inside out. a heater and a cooler. I wish you much fun with it :) Settings: screw d0 sensor Outside screw d1 sensor Inside screw d2 Filterunit (Input Co2) screw d3 Filterunit (Output O2) Tip: for a better co2 supply you can redirect the output for the waste into the tubes of the co2 input screw d4 heater screw d5 cooler