Jbaker96's Auto Arc Furnace Pt.1

Automatically activates five arc furnaces anytime an ore or ice (except water) is placed in the input slot from a chute network. Will disable an attached chute bin anytime all furnaces are full to prevent clogging. With the second part of this code it will also manage 5 sorters leading to each of the furnaces in order to prevent the sorters from clogging. This code should prevent the known arc furnace duping bugs and minimizes sorter issues when used properly. NOTE: This code will function without the part two code located below, however you may expect the sorters to clog under heavy use. Part 2: https://steamcommunity.com/sharedfiles/filedetails/?id=1582022164 Required Items: 5 Arc Furnaces 1 Chute Bin Several Kit (Chutes) Total Materials - Both Codes 5 Arc Furnaces 1 Chute Bin Several Kit (Chutes) 5 Sorters Devices: d0 Set to the chute bin d1 Set to the first arc furnace d2 Set to the second arc furnace d3 Third arc furnace d4 Fourth arc furnace d5 Fifth arc furnace Setup: Place your chute bin and arc furnaces. Leave room near each of the furnace inputs for at least 2 chute sections between the sorter and the furnace. Place each of the sorters so that the sorted output of each sorter leads to the input of each furnace. Looking at the side of the sorter with the output ports, the sorted output is the port on the left. The inline port is on the right and should continue to the input of the next sorter with at least 2 chute sections between each sorter. NOTE: Sorter 1 must output to Furnace 1, Sorter 2 must output to Furnace 2 and so on or clogs will form Create a chute loop, leading from the inline output of one sorter to the next, and from the inline output of the last sorter back to the first sorter. Connect the chute bin to a chute intersection anywhere within this loop at least one chute away from any curves to avoid chute bugs. Turn on both IC housings once and set the pins. The IC housings will turn themselves off the first time, only turn the second I