Auto Hydroponics - Up to 6 Machines

Script for 5 machines, auto manages input, planting and harvesting of plants within the automatic hydro machines.​ Script can be ammended to the amount of auto hydro machines as needed, currently it is configured for 5. Please note this script uses a new slot var "Mature", at the time of writing this var is within the beta branch. Kit Required - 1x IC Housing 1x IC Chip 1x Computer 1x IC Editor Motherboard (for computer) Instructions - Install IC Housing Install IC chip to housing Ensure your auto hydro machines are connected to the same network as your IC housing Using your screwdriver set the IC housing pins to your auto hydro machines, max 6 Install computer to the same network as your IC Housing and Hydroponics machines Install IC Editor card to computer Using computer, ensure you have the correct IC housing selcetd from the drop down if you have more than one IC Housing on your network. Select Edit Select Library You should now see the script in your library, select the load icon to load the scrip to your editor Make any ammendments you need to the script and selct confirm Select export to load the script to the IC Chip Switch on the IC Housing and your set. Script Functions - Checks the hydro machine is powered on, if it is not it then skips to next hydro machine. Checks if the growing chamber has anything in it, if not then it check if it has anything in the import slot, if it does then it plants the seed. If there was a plant in the growing chamber it checks if the plant is mature, if not it moves on to next machine, if it is mature then it havests the plant. Please let me know if any issues, errors or mistakes. Also let me know if your new to scripting and need any assistance to get it working.