Eliminate the too-close-distance correction of all arrows

What is brought this time is a modification to the distance correction of the bow's arrows.

这次带来的是对于弓箭箭矢的距离补正的修改。

Most arrows in MHR have a mechanism-the physical damage of the arrow is corrected according to the firing distance (the element damage is not affected by the distance correction).

MHR中的所有箭矢都有一种机制——箭矢的物理伤害会根据射击的距离进行补正（属性伤害不受距离补正的影响）。

Normally, the distance correction is 1. 0 when firing at "appropriate distance", 0. 8 when firing at "too close distance", and 0. 2 when shooting at "too far distance"(here is unlike ammo whose correction is 0. 1).

通常但讲，当处于“适当距离”射箭时，距离补正为1；当处于“过近距离”射箭时，距离补正为0. 8；当处于“过远距离”射箭时，距离补正为0. 2（这里与弹药不同，弹药为0. 1）。

However, when equiping the "close-range coating", since it shortens the range of effective attacks, the correction from "too close distance" to "appropriate distance" is 1, and add 1. 2's correction provided by the close-range coating. At the same time, the close-range coating will greatly reduce the correction of "too far distance", which is 0. 2 originally, 0. 1 in the unpacking data, and about 0. 06 measured by myself. All in all, if you equip the close-range coating and fire very far from the monster, don't want to hurt it.

但是当插入“接击瓶”时，由于缩短了有效攻击的范围，所以从“过近距离”到“适当距离”的补正都是1，且附加接击瓶的1. 2倍补正。同时接击瓶会大大降低“过远距离”的补正，原本为0. 2，解包数据里说是0. 1，我自己实测大概0. 06左右。总而言之用接击瓶离远了就不要想打伤害了。

I changed the correction of "too close distance" for all arrows from 0. 8 to 1. 0, so you will no longer worry about the "maximum damage distance" of the bow. You can have 1. 0's correction even if you stick to the monster's face.

所以我把所有箭矢的“过近距离”的补正值从0. 8改为了1，这样你不会再为弓箭的“最大伤害距离”而烦恼，即使贴脸也可以打出1补正的伤害。

I haven't changed the correction of "too far distance". It's still 0. 2. I still think it's too rough to change it from 0. 2 to 1.

“过远距离”的补正我并没有修改，依旧是0. 2。我仍然觉得从0. 2改为1还是太暴力了。

Put the ".pak" file under the Steam\ Steamapps\ common\ MonsterHunterRise\.

将pak文件放在Steam\Steamapps\common\MonsterHunterRise\路径下。

If you already use another mod with the same file name, you need to rename the number of the ".pak" file to the next number. For example, change re_chunk_000.pak.patch_000.pak to re_chunk_000.pak.patch_001.pak.

如果您已经使用另一个具有相同文件名的mod，您需要将pak的编号重命名为下一个编号，例如把re_chunk_000.pak.patch_000.pak改为re_chunk_000.pak.patch_001.pak。

To uninstall, simply delete the ".pak" file.

要卸载，只需删除pak文件。