stone disappearance

⭐ — (3 endorsements) 📥 1,471 downloads 📌 v4.3 📅 11/30/2024
🟡 Updated this year

By white_elephant · adventure

⬇ Download Mod Source: Modrinth ↗ 📅 Updated: 10/6/2025 📅 Created: 11/30/2024

🔍 Analysis

  • 👍 0.2% endorsement rate
  • 🏆 #376 of 767 adventure mods in this game by downloads

📋 About This Mod

✅ `overworld_block`:用于替换主世界石头的方块
✅ `nether_block`:用于替换下界石头的方块
✅ `end_block`:用于替换末地石头的方块

# 石头消失 (Stone Disappearance) **The English description is below.** ## 简介 此数据包将世界中的石头替换为其他方块,最低兼容 Minecraft 1.20.3,但只有 Minecraft 1.21.6 及以上版本才能体验完整功能。 ## 功能 默认情况下,数据包将世界中三个维度的四种石头替换为玻璃,每次替换以区块为单位,从玩家所在区块向远处遍历,直到成功清除一个区块,或者遍历完加载范围内所有区块。默认遍历距离为 1,即以玩家为中心的 9 个区块。 ## 配置 此数据包拥有丰富的配置项,在游戏菜单中可以进入数据包的配置界面,但低于 1.21.6 的版本只能通过命令来配置。在此不作说明,如有需要可以修改 `new/reset_settings` 函数文件内的默认配置,并输入 `/function stone_disappearance:new/reset_settings` 初始化配置。 ### 用于替换的方块 - `overworld_block`:用于替换主世界石头的方块 - `nether_block`:用于替换下界石头的方块 - `end_block`:用于替换末地石头的方块 ### 世界高度限制 - `overworld_min`:主世界最低建筑高度 - `overworld_max`:主世界最高建筑高度 - `nether_min`:下界最低建筑高度 - `nether_max`:下界最高建筑高度 - `end_min`:末地最低建筑高度 - `end_max`:末地最高建筑高度 ### 遍历参数 - `n`:遍历距离 - `tick`:每次清除后等待的 tick 数 - `success_num`:一次区块清除被视为成功需要替换的方块数量 ### 优化设置 - `fill_falling_block`:是否替换沙子、红沙、沙砾 - `fill_falling_block_with`:用于替换三种沙子的方块 - `tick_fill`:是否实时清除玩家附近3*3*3区域内的石头 --- ## Introduction This datapack replaces stones in the world with other blocks. It has minimum compatibility with Minecraft 1.20.3, but only Minecraft 1.21.6 and above can experience the full functionality. ## Features By default, the datapack replaces four types of stones in all three dimensions with glass. Each replacement is done chunk by chunk, traversing from the player's current chunk outward until successfully clearing one chunk or traversing all chunks within the loaded range. The default traversal distance is 1, which covers 9 chunks centered on the player. ## Configuration This datapack has rich configuration options. You can access the datapack's configuration interface through the game menu, but versions below 1.21.6 can only be configured through commands. This won't be explained here. If needed, you can modify the default configuration in the `new/reset_settings` function file and enter `/function stone_disappearance:new/reset_settings` to initialize the configuration. ### Replacement Blocks - `overworld_block`: Block used to replace stones in the Overworld - `nether_block`: Block used to replace stones in the Nether - `end_block`: Block used to replace stones in the End ### World Height Limits - `overworld_min`: Minimum building height in the Overworld - `overworld_max`: Maximum building height in the Overworld - `nether_min`: Minimum building height in the Nether - `nether_max`: Maximum building height in the Nether - `end_min`: Minimum building height in the End - `end_max`: Maximum building height in the End ### Traversal Parameters - `n`: Traversal distance - `tick`: Number of ticks to wait after each clearing - `success_num`: Number of blocks that need to be replaced for a chunk clearing to be considered successful ### Optimization Settings - `fill_falling_block`: Whether to replace sand, red sand, and gravel - `fill_falling_block_with`: Block used to replace the three types of sand - `tick_fill`: Whether to clear stones in real-time within a 3×3×3 area around the player

# 石头消失 (Stone Disappearance)

The English description is below.

此数据包将世界中的石头替换为其他方块,最低兼容 Minecraft 1. 20. 3,但只有 Minecraft 1. 21. 6 及以上版本才能体验完整功能。

默认情况下,数据包将世界中三个维度的四种石头替换为玻璃,每次替换以区块为单位,从玩家所在区块向远处遍历,直到成功清除一个区块,或者遍历完加载范围内所有区块。默认遍历距离为 1,即以玩家为中心的 9 个区块。

此数据包拥有丰富的配置项,在游戏菜单中可以进入数据包的配置界面,但低于 1. 21. 6 的版本只能通过命令来配置。在此不作说明,如有需要可以修改 `new/reset_settings` 函数文件内的默认配置,并输入 `/function stone_disappearance:new/reset_settings` 初始化配置。

### 用于替换的方块

  • `overworld_block`:用于替换主世界石头的方块
  • `nether_block`:用于替换下界石头的方块
  • `end_block`:用于替换末地石头的方块
  • `overworld_min`:主世界最低建筑高度
  • `overworld_max`:主世界最高建筑高度
  • `nether_min`:下界最低建筑高度
  • `nether_max`:下界最高建筑高度
  • `end_min`:末地最低建筑高度
  • `end_max`:末地最高建筑高度
  • `n`:遍历距离
  • `tick`:每次清除后等待的 tick 数
  • `success_num`:一次区块清除被视为成功需要替换的方块数量
  • `fill_falling_block`:是否替换沙子、红沙、沙砾
  • `fill_falling_block_with`:用于替换三种沙子的方块
  • `tick_fill`:是否实时清除玩家附近333区域内的石头

## Introduction

This datapack replaces stones in the world with other blocks. It has minimum compatibility with Minecraft 1. 20. 3, but only Minecraft 1. 21. 6 and above can experience the full functionality.

## Features

By default, the datapack replaces four types of stones in all three dimensions with glass. Each replacement is done chunk by chunk, traversing from the player's current chunk outward until successfully clearing one chunk or traversing all chunks within the loaded range. The default traversal distance is 1, which covers 9 chunks centered on the player.

## Configuration

This datapack has rich configuration options. You can access the datapack's configuration interface through the game menu, but versions below 1. 21. 6 can only be configured through commands. This won't be explained here. If needed, you can modify the default configuration in the `new/reset_settings` function file and enter `/function stone_disappearance:new/reset_settings` to initialize the configuration.

### Replacement Blocks

  • `overworld_block`: Block used to replace stones in the Overworld
  • `nether_block`: Block used to replace stones in the Nether
  • `end_block`: Block used to replace stones in the End

### World Height Limits

  • `overworld_min`: Minimum building height in the Overworld
  • `overworld_max`: Maximum building height in the Overworld
  • `nether_min`: Minimum building height in the Nether
  • `nether_max`: Maximum building height in the Nether
  • `end_min`: Minimum building height in the End
  • `end_max`: Maximum building height in the End

### Traversal Parameters

  • `n`: Traversal distance
  • `tick`: Number of ticks to wait after each clearing
  • `success_num`: Number of blocks that need to be replaced for a chunk clearing to be considered successful

### Optimization Settings

  • `fill_falling_block`: Whether to replace sand, red sand, and gravel
  • `fill_falling_block_with`: Block used to replace the three types of sand
  • `tick_fill`: Whether to clear stones in real-time within a 3×3×3 area around the player
🤖 AI-enhanced — based on mod data

📊 Mod Details

Game
Minecraft Data Packs
Author
white_elephant
Version
4.3
Downloads
1,471
Endorsements
3
Category
adventure
Created
11/30/2024
Updated
10/6/2025
Game Versions
1.20.3, 1.20.4, 1.20.5, 1.20.6, 1.21
Tags
adventure, game-mechanics, minigame

🔧 How to Install Minecraft Data Packs Mods

Download from Modrinth. Use Prism Launcher or drop into your mods folder.

📖 Full step-by-step install guide for Minecraft Data Packs →

Visit the official mod page for specific installation instructions for this mod.

🎮 Need cheat codes or console commands? Check ur gaming wiki for Minecraft Data Packs commands, item IDs, and more.

❓ Frequently Asked Questions

Which Minecraft Data Packs versions does stone disappearance support?

The author lists 1.20.3, 1.20.4, 1.20.5, 1.20.6, 1.21, 1.21.1. Other versions may work but are untested by the author.

What is the latest version of stone disappearance?

Version 4.3, published 2025-10-06 with 1,471 downloads recorded at the source.

Keep browsing — more Minecraft Data Packs mods await

📋 All Minecraft Data Packs Mods 🏆 Top 25 📂 More adventure 👤 More by white_elephant 🔎 Similar Mods 🌐 Best adventure (All Games) 🔀 Check Compatibility ⚖️ Compare Mods 🆕 New Mods