Single Engine Fan Car Chassis

A fan car with a single flat 12 engine like the Brabham BT46b, although that one was 3L and this one is 8. 4L. I intend to put a body on it, but that will weigh more, so I thought I'd upload it without first. The fan is driven by the engine through a clutch system. To get the fan running first start the engine and rev it high, then press R to toggle the fan clutch. When it's spinning quite quickly you can drive normally. Gearbox is 5 speed + reverse. When the fan clutch is engaged the maximum steering angle goes down from 90 degrees to 30. If you need to turn tighter you can toggle it off, but this will make the car turn far too quickly when at racing speed. I tried to make it as drivable as possible without the fan engaged. In real life you wouldn't want your car to only be able to drive over 200km/h because you'd never get out of the pit lane, so it can drive alright without, but is much more controllable with the added downforce. I did a 33. 799s inner loop, but I lost a fair amount of time in it. I reckon it can do <30.