Auto Gearbox Controller v2

simple system set up as is for a 5 speed auto gearbox. You will have to tune it yourself with the clutches (3 total, 1 output, 2 for shifting up and down) to set the high and low rpm to shift at, the brake to ajust for over over spin. Theres also a clutch gear inside the planitary, you will want to ajust that too To hook this one up you will want to go into tool 1 settings, turn off the "Fixed Attachment" (+) and insert the end attachment pont of a 2 or longer "Engine Rear (Driven) Crank & Axle" into the Red Beam. Then re-enable the "Fixed Attachment" (+) and nudge the "Engine Rear (Driven) Crank & Axle" so it gains a fixed attachment with the clutch. Pictuers of how to do this are on the steam page.