Bolt-action magazine fed gun

This fully functional magazine-fed bolt-action gun is spring-powered and manually operated with the grab tool. An optional remote firing control (Shift+F) eliminates the need for manual trigger pulling. Loading Instructions: Pull out the grab tool (press 5), maximize strength, and enable free rotation in the Q menu. Grab the sphere on the mag racking slider's back, slam it upwards into the gun, ensuring the magazine's black blocks are just below the guns white ones if failed to insert succesfully give the red sphere on the left side of the gun a grab and small pull to the left when looking at that side of the gun to drop the mag and try again. Now, proceed to cocking. Cocking Instructions: With the magazine inserted, enter the console (press the key under Esc), type "GrabStrength 500" and hit enter (dont forget those caps) for easier cocking. Use the grab tool on the blue plastic sphere on the gun's front right side, pull it upwards to unlock, then slide it firmly and quickly backward until no forward force remains. The catch is now engaged, allowing the charging handle to slide back and be locked down again, completing the process. Firing Instructions: After completing previous steps, a round should be chambered. Pull the trigger with the grab tool or press Shift+E to fire. If using Shift+E, reset with Shift+R after each shot. IMPORTANT!:Be sure to only run it on max update rate and max constraint accuracy or it WILL NOT WORK RELIABLY!