4 Speed Manual Transmission Showcase

This is just a showcase version of my 4 speed transmission which you can find on my workshop. To turn on the test, press E. Then follow the instructions on how to use bellow. This is a 4 speed manual transmission made for a sports/muscle car. Feel free to take it apart to figure out how it works How to use: -To change gear, use "X" to shift up, and "Z" to shift down, or change the settings in the stepper motor above the yellow block on the output side of the engine. -To connect this to a vehicle, use the red axle as the input (from the engine) and connect it to the main "crank shaft". Then, use the green axle as the output (to the wheels) and connect that to the main drive shaft. Lastly, connect beems or boards to the front or back of the transmission. -If the transfer gear is stuck out of alignment, turn off and then back on the stepper motor above the yellow block. -------------------------------------------------------------------- -Keep in mind that the output is reversed from the input- The ratios are: 1-3:1 2-1. 6:1 3-1:1 4-0. 6:1 Special thanks to youridevrije05's 3 speed transmission for helping me get unstuck from my troubles of figuring out the transmission. And a very special thanks to my friend doge2344/3dmachines2 for buying me this game. Made by: JulBlox