HAE ≋ 𝐈𝐍𝐓𝐄𝐑𝐈𝐔𝐒 𝐔𝐋𝐓𝐈𝐌𝐈𝐍𝐔𝐒

The 𝐈𝐍𝐓𝐄𝐑𝐈𝐔𝐒 𝐏𝐑𝐎𝐉𝐄𝐂𝐓, A heavy weight class Aerial battleship designed by the Hyperion Aerial Engineering sub sector divison. Intended for the use as a battleship that can withstand damage and still remain fuctioning at 40% Structual integrity. There were three models proposed. Only one was to be used. 𝐍𝐄𝐗 The paper variant mainly designed to showcase the battleship but itself had no combat ability and was only built to test the mobility of the project design, As well as its weight restrictions and max range. Many features installed were removed due to reliability issues (1000mm Artillery cannons) 𝐏𝐑𝐈𝐌𝐔𝐒 First fuctioning combat variant, Featuring fuctioning cannons and proved to be reliable and did not have issues with its weapons, Installed Rapid fire dual 6 barreled 150mm Kinentic Shredding Cannons to replace the 1000mm Artillery cannons. However the engine power was not sufficent and a second engine was installed into the middle chassis to support the shields. This design was dropped due to the combat ability not being suffice to deal with hostiles of similar size. 𝐔𝐋𝐓𝐈𝐌𝐈𝐍𝐔S The last proposed design of the project and thus was named Ultiminus for this fact. It was intended to remove all previous flaws of the Primus Variant and increase combat surivability and combat effectiveness equally. 𝐏𝐑𝐈𝐌𝐀𝐑𝐘 𝐀𝐑𝐌𝐀𝐌𝐄𝐍𝐓 The Ultiminus featured (7) 500mm Auto-Large calibre cannons that featured HESH and shield breaking ammunition. (3x HESH 1x Shield Breaker rounds, 11 Belts) ( 96 RPM, 43 shells per turret.) The drawback of the weapons was that ammunition, during the start of a fight only two cannons will be ready for firing but by 10 seconds another 2 turrets will be ready and so on. What this means is you will usaully have turrets firing at the target even if some turrets are refilling their clips. 𝐒𝐄𝐂𝐎𝐍𝐃𝐀𝐑𝐘 𝐀𝐑𝐌𝐀𝐌𝐄𝐍𝐓 4x (6x25mm, Ammo: 1158) Anti-Missle Turret (located next to the bridge, top and bottom) 2x (3xOscilat