LevelerMod

Place 2 target material blocks vertically at the desired location. The upper block determines the fill area. The lower block is filled with the same area as the upper block and will fill any vertical gaps between the new filled area and the current ground level. The blocks at the same elevation as the leveler block are set to air (as much as possible) to clear flowers, etc. that may be left floating. Place a leveler block on top of these 2 blocks. If air is desired, it may be necessary to create dummy block(s) then destroy them after placing the leveler block. Shoot the leveler block with an arrow to start the flood fill. Examples: - Level sand blocks at a dip in the desert. - Place grass blocks in the woods filled with flowers. - Place a water block under a glass block to create a lake. - Generate a flat roof from enclosed walls. A fill algorithm is used to fill all empty blocks with the target block(s). An unbounded fill will terminate at a X or Y distance of 200 squares (currently, this may change). All empty blocks will be replaced in the fill area. Empty blocks include: - air - flowers - grasses Trees and cacti and some desert grasses may not be cleared.... Any pickaxe destroys the leveler block without performing leveling. Any other tool will display some help info.