2021 H Motors FSWT01

2021 H Motors Formula Street World Tour FSWT01 After the Coronavirus debacle of 2020, Formula Street’s inaugural season was moved to 2021. This car was originally designed for 2020, but wasn’t able to be built until 2021. Meanwhile, the team was busy building ventilators. When that was over, they got back to the car. The car competes in the World Tour series, which has a 50% fuel flow rate limit above every National series. Compared to the National series, the World Tour series has a larger calendar (16 vs <=12). Cars run with tyres that don’t rubber in or produce marbles, allowing the entire track to have a similar amount of grip. Downforce isn’t that strong, but it doesn’t produce dirty air that can reduce downforce for following cars. The FSWT01 weighs 1972 lbs, or 895kg. This makes it slightly heavier than other contenders. However, don’t let that fool you, because despite the fuel flow limit, the car boasts a 2. 6L W8 TT producing around 400hp @ 9500rpm. The turbos aren’t there for power, but to help with efficiency. The car produces quite a lot of downforce compared to the other cars, despite a slight lack of mechanical grip. As a result, the car will excel on tracks with fast corners and long straights, but suffer on tracks with a lot of low speed corners. The 5 speed gearbox was supplied by GMI, and is very efficient (sending 99% of the engine power to the wheels) Handling should be quite easy, but as the car is RWD, if you get too greedy with the throttle in corners, and you will drift slightly, but too much and you might hit the inside wall. Wheelbounce is an issue, I’ll try to look into that but stay safe. Using cockpit view will definitely be fun with all the bodywork in the way ;). You also don’t suffer under braking. Enter operation mode to open the top part of the car. Credit to Zabuza, Gryzbek337, ßpün and Tom for helping me build this racer. If you want to build a similar car for FSWT, use the chassis here: https://steamcommunity.com/sharedfiles/file