Self-Sustaining Fertile Catalyst

Self-Sustaining Fertile Catalyst (V1) Warning & Requirements This is a V1 version. Due to the high cost of the recipes used, the production output is relatively low. Fertilizer Efficiency: I strongly suggest not using this setup if you have less than 15 points in Fertilizer Efficiency. Ratios: At 260% Efficiency (after saturation), the production rate is approximately 1/3 of a machine (10 per Minute with maximum points in production and Belt). Edit : With 400% fertilizer efficiency, the setup makes perfect sense and generates twice as much as previously mentioned, and I counted 20 per minute... That seems strange to me; maybe I messed up the math. Design Philosophy: The size of this setup has been fully optimized for compactness, even if it means a slight hit to overall efficiency. Pro Tip: As usual, aim for an equal balance between your Production points and Belt Speed points for the best results. Setup Instructions Initial Input: Insert a minimum of 300 Unstable Catalysts Fertile Catalyst (In green box). It is not recommended to start the production with less than this. Resources: Split the Gooseberries into the two top cauldrons. Stabilization: Wait until you have at least 50 units of each ingredient in the bottom cauldrons. Startup: Once everything is ready, light up one furnace to kickstart the loop.